Krone Comprima F 125 XC-1, Руководство по эксплуатации

Страница: 318 / 374

8 Terminal error messages
8.1 Faults of the electrics/electronics
74
Comprima F 125 - 1, Comprima F 125 XC - 1, Comprima F 155 - 1, Comprima F 155 XC - 1, Comprima V 150 - 1,
Comprima V 150 XC - 1, Comprima V 180 - 1, Comprima V 180 XC - 1, Comprima V 210 XC - 1
Comfort 1.0_en
Possible cause Remedy
FMI 11: The error cause is unknown.
The supply voltage of the
sensors could not be activ-
ated. „
Note the error number and the FMI. Then contact the
dealer.
522005-
Universal shaft
Possible cause Remedy
FMI 0: The universal shaft is rotating more quickly than permitted.
The set rotational speed of the
PTO shaft that drives the uni-
versal shaft is too high.
„
Check the rotational speed of the PTO shaft set at the
tractor. Make sure the rotational speed is not higher than
540 rpm.
FMI 2: The universal shaft is rotating in “road mode”.
The PTO shaft is switched off
in road mode. „
Switch off the PTO shaft in road mode.
522010-
Blade cassette, for the “Hydraulic blade group control system” version
Possible cause Remedy
FMI 7: The blade cassette signals an error.
The blade cassette is not
closed. „ Swing in the blade cassette using the tractor hydraulics.
522011-
Blade cassette, for the “Hydraulic blade group control system” version
Possible cause Remedy
FMI 7: The blade cassette signals an error.
The blade preselection has
been changed.
„
Swing out the blade cassette using the tractor hydraulics.
522012-
OFF
Blade cassette
Possible cause Remedy
FMI 7: The blade cassette signals an error.
The blade cassette is not
closed. „
Close the blade cassette using the tractor hydraulics.
Sensor B08 “Blade cassette
up” is defective or has been
set incorrectly. „ Check and adjust sensor B08 “Blade cassette up”, refer to
page 52 .
522013-
Blade cassette