Krone Comprima F 125 XC-1, Руководство по эксплуатации

Страница: 143 / 374

Operation
143
Pos: 43.84.33 /Überschriften/Überschriften 3/A-E/D/Dehnung der eingelegten Folie prüfen @ 351\mod_1436867745262_78.docx @ 2630477 @ 3 @ 1
9.16.4 Checking the Stretching of the Inserted Film
Pos: 43.84.34 /BA/Bedienung /Rundballenpresse/Folienbindung/Dehnung der eingelegten Folie prüfen_Einleitung @ 489\mod_1484654869728_78.docx @ 3289405 @ @ 1
The round bales must be tied with the suitable film stretch level. KRONE recommends
prestretching of between 5–15%. Whether prestretching of between 5–15% has been achieved
can be checked as follows.
Pos: 43.84.35 /BA/Bedienung /Rundballenpresse/Folienbindung/Dehnung der eingelegten Folie prüfen_Bild @ 475\mod_1473082577933_78.docx @ 3210066 @ @ 1
COM00405_1
X
1
2
Fig. 115
Pos: 43.84.36 /BA/Bedienung /Rundballenpresse/Folienbindung/Dehnung der eingelegten Folie prüfen_Text-vorauss_BA_Comprima F V_+X-treme @ 416\mod_1453211037940_78.docx @ 2919396 @ @ 1
Prerequisites:
– A round bale is pressed with film tying and put down on the field.
– The machine is shut down and safeguarded, refer to chapter Safety, Safety Routines,
“Shutting Down and Safeguarding the Machine”.
Pos: 43.84.37 /Layout Module /----------------Leerzeile-------------------- @ 240\mod_1395147357027_0.docx @ 1890988 @ @ 1
Pos: 43.84.38 /BA/Bedienung /Rundballenpresse/Folienbindung/Dehnung der eingelegten Folie prüfen_Text_BA_alle Comprima @ 489\mod_1484654892008_78.docx @ 3289436 @ @ 1
• Using a film pen, draw two horizontal lines (1) at a distance X=100 mm on the film.
• Cut out the piece (2) all around the two drawn lines. Make sure to cut out all film layers.
• Allow all film layers of the cut-out piece (2) to rest for at least 3 minutes.
• Measure the distance X between the drawn lines (1).
Pos: 43.84.39 /BA/Bedienung /Rundballenpresse/Folienbindung/Dehnung der eingelegten Folie prüfen_Tabelle_BA_alle Comprima @ 490\mod_1485166600817_78.docx @ 3291071 @ @ 1
If the distance X is between 86 and 95 mm, prestretching has been set correctly.
Measured value X Prestretching Valuation
< 86 mm > 15% Prestretching is too strong. Reduce the
brake force at the film brake, see chapter
Settings – "Setting the film brake".
86 mm 15% Correct
95 mm 5% Correct
> 95 mm < 5% Prestretching is too weak. Increase the
brake force at the film brake, see chapter
Settings – "Setting the film brake".
Pos: 43.84.40 /BA/Info-Center/ALLE Terminals in einem - ISOBUS, Delta, BETA II (ab BJ 15/16)/ALLE Terminals/Rundballenpressen/Menü 1-1_1 Anzahl Folienlagen_Hinweis KRONE Empfehlung_ALLE Terminals_Comprima @ 489\mod_1484551566948_78.docx @ 3288462 @ @ 1
Note
KRONE recommends 3.5 – 4 film layers for optimum chamber film wrapping. The minimum
required film layers depend on the condition of the crops.
With round bales whose diameter measures more than 130 cm and/or very dry or very wet
crops, KRONE recommends at least one additional film layer.
Pos: 43.84.41 /Layout Module /---------------Seitenumbruch---------------- @ 0\mod_1196175311226_0.docx @ 4165 @ @ 1