manualshive.com logo in svg

Krone Comprima F 125 XC-1, Руководство по эксплуатации

Поделиться
Скачать
Krone Comprima F 125 XC-1 Скачать руководство пользователя страница 214

Maintenance

 

 

214 

 

Pos: 47.133.1 /Überschriften/Überschriften 2/U-Z/WWartung-Bremsanlage @ 34\mod_1255593197094_78.docx @ 324322 @ 2 @ 1 

 

11.23 

Maintenance – brake system (special equipment) 

Pos: 47.133.2 /BA/Sicherheit/2. Vorangestellte Warnhinweise/WARNUNG - Nichtbeachtung der grundlegenden Sicherheitshinweise alte Form @ 254\mod_1397485793575_78.docx @ 1953347 @  @ 1 

 

 

WARNING! 
If the basic safety instructions are not followed, people may be seriously injured or 
killed.  

• 

To avoid accidents, the basic safety instructions in the chapter Safety must have been 
read and followed, see chapter Safety "Basic safety instructions". 

 

Pos: 47.133.3 /BA/Sicherheit/2. Vorangestellte Warnhinweise/WARNUNG - Nichtbeachtung der Sicherheitsroutinen alte Form @ 273\mod_1404117435996_78.docx @ 2058712 @  @ 1 

 

 

WARNING! 
If the safety routines are not adhered to, people may be seriously injured or killed.  

• 

To avoid accidents, the safety routines in the chapter Safety must be read and followed, 
see chapter Safety "Safety routines". 

 

Pos: 47.133.4 /BA/Sicherheit/Bremsen/WARNUNG - Bremsanlage @ 273\mod_1403676268419_78.docx @ 2053696 @  @ 1 

 

 

WARNING! 
Risk of injury resulting from damage to the brake system 

Damage to the brake system may impair the operational safety of the machine and cause 
accidents. As a result, people may be seriously injured or killed. 
• 

Adjustment and repair work on the brake system must only be performed by authorised 
professional workshops or recognised brake services. 

• 

Have the brakes checked regularly by a specialist workshop. 

• 

Have damaged or worn brake hoses replaced immediately by a specialist workshop. 

• 

Irregularities or malfunctions in the brake system must be rectified immediately by a 
specialist workshop. 

• 

Only a machine with an intact brake system may be used for work in the field or for 
travelling on roads. 

• 

No changes may be made to the brake system without the approval of KRONE. 

• 

KRONE is not responsible for natural wear, defects caused by overload or changes made 
to the brake system. 

 

Pos: 47.133.5 /Layout Module /---------------Seitenumbruch---------------- @ 0\mod_1196175311226_0.docx @ 4165 @  @ 1 

Содержание Comprima F 125 XC-1























































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды