Krone Comprima F 125 XC-1 Скачать руководство пользователя страница 27 | Manualshive

Страница: 27 / 374

Krone Comprima F 125 XC-1 Скачать руководство пользователя страница 27

Safety

27

Pos: 16.1 /Überschriften/Überschriften 2/P-T/SSicherheitsroutinen @ 187\mod_1380089318480_78.docx @ 1608182 @ 2 @ 1

3.5

Safety routines

Pos: 16.2 /Überschriften/Überschriften 3/K-O/MMaschine stillsetzen und sichern @ 190\mod_1381323544614_78.docx @ 1624780 @ 3 @ 1

3.5.1

Stopping and securing the machine

Pos: 16.3 /BA/Sicherheit/3. SicherheitsroutinenMaschine stillsetzen und sichern -gezogene Maschinen_mit Feststellbremse @ 488\mod_1482310366324_78.docx @ 3282695 @ @ 1

WARNING!
Risk of injury due to movement of the machine or machine parts!

If the machine has not been shut down, machine or machine parts may move unintentionally.
People may be seriously injured or killed, as a result.
•

Before leaving the tractor cabin: Shut down and safeguard the machine.

To shut down and safeguard the machine:
•

Park the machine on a stable, horizontal and even surface.

•

Switch off the drives and wait until coasting parts have come to a standstill.

•

Switch off tractor engine, remove the ignition key and take it with you.

•

Use the parking brakes to secure machine and tractor against rolling.

Pos: 16.4 /Überschriften/Überschriften 3/A-E/A/Angehobene Maschine und Maschinenteile sicher unterbauen @ 190\mod_1381323662799_78.docx @ 1624809 @ 3 @ 1

3.5.2

Supporting lifted machine and machine parts securely

Pos: 16.5 /BA/Sicherheit/3. Sicherheitsroutinen/Angehobene Maschine und Maschinenteile sicher unterbauen_ALTE FORM @ 277\mod_1404810762702_78.docx @ 2077603 @ @ 1

WARNING!
Risk of injury due to movement of the machine or machine parts

If the machine is not supported securely, the machine or machine parts may roll, fall or drop.
As a result, people may be seriously injured or killed.
•

Before working on or under raised components: Securely support machine or machine
parts.

To securely support the machine or machine parts:
•

Shut down and safeguard the machine, see chapter Safety, "Shutting down and
safeguarding the machine".

•

Before performing any work on or under raised machine parts, lower the machine parts or
secure them mechanically with rigid safety supports (e.g. support stand, crane) or with a
hydraulic shut-off device (e.g. stop cock) to prevent them from dropping.

•

Never support the machine or machine parts with materials which can buckle.

•

Never support the machine or machine parts with hollow blocks or bricks. Hollow blocks or
bricks may break under continuous load.

•

Never work under the machine or machine parts which are held up by a car jack.

Pos: 16.6 /Layout Module /---------------Seitenumbruch---------------- @ 0\mod_1196175311226_0.docx @ 4165 @ @ 1

«
...
25
26
27
28
29
...
»

Содержание Comprima F 125 XC-1























































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды