Krone Comprima F 125 XC-1, Руководство по эксплуатации

Страница: 18 / 374

Safety
18
Pos: 14.27.1 /Überschriften/Überschriften 3/F-J/G/Gefahrenbereiche @ 187\mod_1380012427290_78.docx @ 1606906 @ 3 @ 1
3.4.9 Danger zones
Pos: 14.27.2 /BA/Sicherheit/1. Grundlegende Sicherheitshinweise/Gefahrenbereiche_Einleitung_fuer alle @ 453\mod_1463991292572_78.docx @ 3077571 @ @ 1
When the machine is switched on, a danger zone may be created around this machine.
To avoid getting into the danger zone of the machine, maintain at least the safety distance.
If the safety distance is not followed, people may be seriously injured or killed.
•
Do not switch on the drives and the engine until you are sure that no one has ignored the
safety distance.
• If people ignore the safety distance, switch off the drives.
• Stop the machine in the shunting operation and field mode.
Pos: 14.27.3 /BA/Sicherheit/1. Grundlegende Sicherheitshinweise/Gefahrenbereiche_Sicherheitsabstand_Tabelle_LW_RP_BP_Transportwagen @ 453\mod_1463997691799_78.docx @ 3078640 @ @ 1
The safety clearance is:
For a machine in shunting operation and
field mode
In front of the machine 3 m
Behind the machine 5 m
Laterally to the machine 3 m
For machine switched on without driving motion
In front of the machine 3 m
Behind the machine 5 m
Laterally to the machine 3 m
Pos: 14.27.4 /BA/Sicherheit/1. Grundlegende Sicherheitshinweise/Gefahrenbereiche_Sicherheitsabstand_allg Text_fueralle @ 453\mod_1463992314739_78.docx @ 3077782 @ @ 1
The safety distances named here are minimum distances according to the intended use. These
safety distances must be increased depending on operating conditions and environmental
conditions, when required.
Pos: 14.27.5 /BA/Sicherheit/1. Grundlegende Sicherheitshinweise/Gefahrenbereiche_Text Abhilfe_Vorsätze BX_BP_RP_LW_Schwader_Wender_Mähwerke @ 453\mod_1463998103218_78.docx @ 3078671 @ @ 1
• Before working in front of or behind the tractor and in the danger zone of the machine: Shut
down and safeguard the machine, refer to chapter Safety, “Shutting Down and
Safeguarding the Machine”. This also applies to brief inspection work.
• Follow the information in all operating instructions concerned:
–
The operating instructions of the tractor
– The operating instructions of the machine
– The operating instructions of universal shaft
Pos: 14.27.6 /BA/Sicherheit/1. Grundlegende Sicherheitshinweise/Gefahrenbereich Gelenkwelle_fuer alle @ 453\mod_1463993075614_78.docx @ 3077842 @ @ 1
Danger zone universal shaft
People may become caught by the universal shaft, pulled in and seriously injured.
•
Observe the operating instructions of the universal shaft.
• Provide the section tube and universal shaft guards with adequate cover.
• Allow the universal shaft locks to engage.
• Attach the chains to prevent the universal shaft guards from rotating with the shaft.
• Ensure that there is nobody in the danger zone of PTO shaft and universal shaft.
• Make sure that the universal shaft guards are attached and functional.
• If the angles between universal shaft and PTO shaft are too large, switch off the PTO shaft.
The machine may be damaged. Parts could be hurled up and hurt people.
Pos: 14.27.7 /Layout Module /---------------Seitenumbruch---------------- @ 0\mod_1196175311226_0.docx @ 4165 @ @ 1