8
Operation
8.3
Completion of the baling process, start of tying, and ejection of the round bale
58
Bellima F 130
Original Operating Instructions 150000148_06_en
Further hints for filling the bale chamber
•
Lower the driving speed during the start and the end of filling.
•
At the end of filling, start the tying cycle already while crops are still being picked up. Then,
the round bale in the bale chamber continues to rotate so that the wrapping material is
grabbed automatically.
•
It is possible to start picking up crops again while the tailgate is still closing.
8.3
Completion of the baling process, start of tying, and ejection of the
round bale
RPG000-049
The obtained baling pressure (filling level of the bale chamber) can be read off separately for
the right and left sides of the machine on the red baling pressure indicators (3).
Depending on the obtained baling pressure, the red baling pressure indicators (3) are between
1 and 3 on the scales (1). The higher the number, the higher the baling pressure.
A required baling pressure can be set on the black preselection indicators (2). To set the baling
pressure,
For the "Electronic baling pressure indicator" version
When the set baling pressure is reached, the driver in the tractor sees a signal on the electronic
baling pressure indicator,
. In doing so, continue picking up crops until the
wrapping material is caught by the round bale.
During the tying process set the machine back several metres.
Drive forwards until the tailgate no longer touches the round bale.
When the tying process is complete, hydraulically open the tailgate of the bale chamber all
the way,
Æ
The round bale rolls onto the field.
Æ
The tailgate is locked when the right bale pressure indicator (2) is below position "0".
8.4
Initiating the tying cycle
Depending on the configuration, the tying cycle can be initiated mechanically or hydraulically.
