8
Operation
8.12
Net wrapping
70
Bellima F 130
Original Operating Instructions 150000148_06_en
RPG000-016
ü
The machine is shut down and safeguarded,
.
Raise the lever (1).
Swing the roll holder (4) and brake disc (2) forward.
Pull off the brake disc (2).
Take a new net roll from the package. Make sure that the beginning of the net roll faces
towards the machine and can be pulled out from above.
Slide the net roll onto net roll holder (4) and the support (5).
Slide the brake disc (2) with the sleeve clamp (3) anti-clockwise into the sleeve of the net roll
as far as it will go.
Æ
The net roll is permanently locked in the roll holder (4).
Check that the net roll is aligned centrally. To do so, measure the distance dimensions to
the left and right side walls.
RPG000-017
If the net roll is not centrally aligned:
Use a mounting lever (6) to push the net roll in the desired direction shown by the arrow until
the net roll is positioned in the centre.
