Krone Bellima F 130, Оригинальная инструкция по эксплуатации

Страница: 103 / 134

Maintenance 11
Checking and adjusting the net wrapping device 11.9
Bellima F 130
Original Operating Instructions 150000148_06_en 103
11.9.3 Adjusting the cutting unit
RP000-130
ü
The machine is shut down and safeguarded, refer to page 24 .
Setting the distance Y between cutter blade (7) and cutting edge (6)
The distance Y between cutter blade (7) and cutting edge (6) must be X=2-5 mm .
ü
The tailgate is opened.
ü The pick-up is lowered.
ü
The pawl (3) is in the position shown.
„
To set the distance Y, loosen the counter nut at the screw (4) and set the distance Y.
„
Tighten the counter nut at the screw (4).
Setting distance X between slightly lowered spring rail (2) and setting screw (1)
The distance X between slightly lowered spring rail (2) and setting screw (1) must be X=1 mm .
ü
The spring rail (2) has been removed from the setting screw (1) and slightly lowered.
ü
The dimension has been correctly set when the spring rail (2) is positioned on the setting
screw (1),
refer to page 102 .
„ To adjust the distance X, loosen the screws (5) and move the spring rail until the distance
X=1 mm .
„
Tighten the screws (5).