Disturbance, cause and remedy
12
Setting the mechanical baling pressure indicator 12.10
Bellima F 130
Original Operating Instructions 150000148_06_en
123
ü
The respective side guard on the right-hand or left-hand machine side is open.
Loosen the nuts (3).
To tension the wire rope (1), move the eyelet bolt (2) in direction of the arrow until the
respective baling pressure indicator is in the correct position.
Tighten the nuts (2).
With the bale chamber full and the tailgate still closed, the mechanical baling
pressure indicator is not in position "3"
RPG000-046
If, with the bale chamber full, the lock hook (1) of the tailgate is not in the bottom-most position
(as shown in the figure) but the tailgate is still closed, the right-hand side baling pressure
indicator (4) must be in position "3".
If the right-hand side baling pressure indicator is not in position "3":
ü
The right-hand side hood is open.
Loosen the nuts (2) and tun until the right-hand side baling pressure indicator is in position
"3".
Tighten the nuts (2) against each other.
