Krone Bellima F 130, Оригинальная инструкция по эксплуатации

Страница: 81 / 134

Settings 10
Setting the baling pressure 10.6
Bellima F 130
Original Operating Instructions 150000148_06_en 81
Dimension X Number of net layers
12 mm 1
24 mm 2
36 mm 3
ü The machine is shut down and safeguarded, refer to page 24 .
ü
The spring rail (3) is in the bottom position.
„
Insert a hexagon wrench into the setting screw (1) and loosen the counter nut (2) with left-
hand thread.
„
Open the setting screw (1) until the required dimension X is set.
10.6 Setting the baling pressure
RP000-134
The black preselection indicators (2) on the front side of the machine can be set to give you a
visual indication of when the desired baling pressure has been reached. The baling pressure
must not exceed setting "3".
For the "Electronic baling pressure indicator" version
When the set baling pressure is reached, the driver in the tractor sees a signal on the electronic
baling pressure indicator,
refer to page 72 .
Crops Pressure range
Hay low
Straw medium/high
Silage hoch
Make the following settings equally on the right-hand and left-hand side of the machine:
ü The side guard is open.
„
Loosen the wing nut (1).
„ Move the preselection indicator (2) up or down to the desired position.
„
Tighten the wing nut (1).