Kozi BayWin, Руководство пользователя

Страница: 9 / 32

Page 9
The exhaust vent pipes are located on the exhaust side of the exhaust fan and are under
positive pressure. At least 3 screws are needed for securing all joints for connector pipes.
Care must be taken to ensure that all the joints are completely sealed to prevent any
leakage of exhaust fumes into the house. If you smell smoke, the venting has not been
properly sealed. Use only high temperature RTV silicone for sealing. Aluminum tape is
not considered an adequate sealant.
The venting of this heater is not allowed to pass through any closets, concealed spaces,
through a floor, ceiling or attic space. If the venting is to go through a wall or combus-
tible partition, the installation must conform to the Installation Code for Solid Fuel
Burning Appliance and Equipment CAN / CSA -B365. For more detailed venting
information, please refer to your venting manufacturer’s instructions.
5.2 Exhaust Vent Termination Requirements
1. The exhaust vent must terminate into an open space. Under no
circumstances is the vent allowed to terminate into closed or semi-
closed spaces. Venting into a garage, under a sun deck, porch or any
other space where the concentration of fumes may occur is prohibited.
To calculate EVL use the following formula:
for each 90° Elbow or T fitting = add 5 EVL
for each 45° Elbow = add 3 EVL
for each Horizontal run of vent = add 1 EVL per foot of horizontal venting
for each Vertical run of vent = add 1/2 EVL per foot of vertical venting
DO NOT USE MAKESHIFT MATERIALS OR MAKE COMPROMISES IN
THE INSTALLATION. IT IS A FIRE HAZARD.
DO NOT INSTALL A FLUE DAMPER IN THE EXHAUST
VENTING SYSTEM OF THIS HEATER
DO NOT CONNECT THIS HEATER TO A CHIMNEY
FLUE SERVING ANOTHER APPLIANCE
YOU MUST USE APPROPRIATE 4” VENTING IF:
The EVL is 7 or more AND you are at or above an altitude of 3000 ft
OR
The EVL is 15 or more
OR
Your heater is an Insert
CAUTION: EVL CANNOT EXCEED 25ft (7.6 meters). Installations
using an EVL exceeding 25ft (7.6 meters) are not permitted.