Stone Age NA72IND, Инструкция по установке и эксплуатации

Страница: 1 / 14

1
Report 307-F-02b-2
Installation and Operation
Instructions
Stone Age Indoor Fireplace
1.0 Introduction
The following provides instructions for the installa-
tion and operation of the Stone Age Fireplace, manu-
factured by Stone Age Manufacturing, Collinsville,
Oklahoma.
Three generations of fireplace knowledge and expe-
rience have gone into the design and construction of
the New Age series fireplaces. New Age Fireplaces
are manufactured to comply with UL127 for the US,
and ULCS610 for Canada. They are also manufac-
tured to comply with ICC-ES AC156 meeting struc-
tural design requirements for Earthquake Testing at a
compliance level of Sds = 2.5g. The ICC-ES AC156
complies with 2010 American Society of Civil Engi-
neers (ASCE) 7-10, 2009 International Building
Code (IBC), 2010 California Building Code and
2012 ICC-ES AC156. Assembly and Cutaway
views of a NA72IND fireplace are shown in Figure
1.
Because of structural modifications required in an
existing home, it is recommended that this fireplace
be installed by a professional installer, or by a build-
er in new construction. Installation by a non-
qualified person may negate the warranty.
Keep these instructions for future use.
2.0 Description
The fireplace is delivered as a kit with all compo-
nents necessary to complete the installation. The kit
is configured for a flue chimney, but a special adapt-
er is available for a metal chimney. Component ar-
rangement, some of which is optional, is shown in
Figure 2. Components are shown in Table 1. Speci-
fications and installation dimensions are shown in
Table 2.
A completed installation should include the follow-
ing:
A. Fireplace items shown in Figure 2 and listed in
Table 1.
B. Damper (sold separately) (Shown in Figure 12).
C. Chimney Cap (sold separately) (Shown in Fig-
ure 24).
D. Fireplace Grate (sold separately) (Shown in
Figure 28).
E. Full firebrick (sold separately)
F. Stone Age Multi-Purpose Ready-Mix Cement
(sold separately).
The Stone Age Fireplace has been manufactured to
comply with UL 127 and ULC S610 standards for
indoor or outdoor use.
This fireplace is designed to supplement your current
heating system. It is not designed to be used as a
primary heat source.
Ensure that appropriate building permits required by
local codes are obtained before installation in an ex-
isting home.
Ce manuel est disponible en français à www.stoneagemanufacturing.com .
This manual is available in French at www.stoneagemanufacturing.com .
NA72IND
Front View
Figure 1. NA72IND Fireplace Assembly
& Cutaway View
Side
Cutaway
View