Kozi BayWin, Руководство пользователя

Страница: 21 / 32

Page 21
5. Once fuel has accumulated in the burn pot, the igniter will lite the fuel
and a flame will appear. Allow the flame to stabilize. IN THE
EVENT YOUR HEATER SHUTS OFF BEFORE THE FLAME IS
STABLE, press the start button one more time.
Your heater is now working for the first time.
2.6 Starting (lighting) your Heater
To start your heater, complete the follow steps:
1. Ensure there is adequate fuel in the hopper and that all ashgates and
doors are closed. Open ashgates/door will turn OFF the feed system.
2. Turn the fuel feed knob to desired setting. (If in doubt, adjust to 12
o’clock setting)
3. Adjust damper to approximate setting. (If in doubt, pull open to
approximately 3/4" - 2 cm)
4. If your heater is equipped with an “electric start”, proceed to step 9. In
the event that your “electric start” should fail, proceed to step 5.
5. Open the burn chamber door and place a handful of fuel in the burn
pot. The burn pot should be approximately 1/4 full with wood pellets.
6. Pour lighter gel on pellets in the burn pot.
7. Ignite lighter gel with a barbecue lighter and allow the pellets to catch
fire. DO NOT ATTEMPT TO IGNITE HOPPER FUEL ON FIRE.
8 Close the combustion chamber door.
9. Press the start button. The following should happen :
a. The exhaust fan will start.
b. The circulation fan will start at the fan speed control setting.
c. The feed system begins to feed. The auger and trouble shooting
lights should begin to blink.
d. If an electric start is installed, it will come ON.
e. On electric start models, the flame should appear within 5 to 10
minutes.
10. Allow the flame to stabilize for 15 minutes.
11. Adjust the feed and damper as necessary. (see “Adjusting your Heater”
section)
12. If the heater shuts OFF during the start up cycle and there is still a
flame, press the start button again.
DO NOT BURN GARBAGE OR FLAMMABLE FLUIDS SUCH AS
GASOLINE, NAPHTHA OR ENGINE OIL.
HOT WHILE IN OPERATION. KEEP CHILDREN, CLOTHING AND
FURNITURE AWAY. CONTACT MAY CAUSE SKIN BURNS.
WARNING: Make sure the amount of fuel in the burn pot does not
exceed the height of the burn pot at any point during operation. This
can cause severe damage to your heater.