Kozi BayWin, Руководство пользователя

Страница: 4 / 32

Page 4
I. Installation and Operation Manual
This heater is suitable for both mobile home and conventional home installation. Read all
instructions carefully before starting installation. Save this manual for future reference.
1. Preamble: Instructions for Safe Installation and Operation
1. Read these instructions carefully. Failure to follow them could cause a
malfunction of the heater resulting in damage to the heater, property,
bodily injury and even death.
2. Familiarize yourself with the heater operation. (Refer to the “Under-
standing you Pellet Burning Heater” section) If you are unsure, ask
your dealer to explain how to operate the heater properly.
3. The burn pot of this heater is designed for premium grade wood pellets.
Pellets with too much fines and saw dust must be screened before use.
DO NOT use wet pellets. Refer to the “Fuel Requirements” section for
more information.
4. Oil the circulation fan motor bearings every 6 months. See the “Mainte-
nance” section for more details.
5. Check with the local code authority regarding restrictions or installation
requirements.
6. This heater requires a floor protector beneath the heater and extending a
minimum of 6 inches (150mm) in front of the heater. This is to catch
any spillage, which may occur during opening and closing of the
doors.
7. Use only UL/ULC listed Type Pl or Type L venting for the exhaust
system. This heater is designed to use 3-inch (76 mm) vent pipe. Avoid
long runs and too many bends. It may be necessary to increase the size
of the vent pipe to 4 inches (102 mm) if long runs and too many bends
in the venting system are unavoidable. For details see the “Venting
System” section.
8. Combustion of wood pellet fuel deposits ash in the heater and venting
system. These ashes must be removed from the heater regularly
(approximately once a week, more frequently for high ash content
fuels). Refer to the “Maintenance” section for more information.
9. The heater must be turned OFF and allowed to cool completely before
cleaning. Make sure there are no hot ashes or embers present. Use a
brush and scoop to remove all of the ashes and place them in a metal
container.