Konica Minolta MS 2000, Инструкция по установке и эксплуатации

Страница: 3 / 59

Section 1 - Overview & Hardware Installation
Thank you for purchasing a Minolta TWAIN-supported Microform or Publication Scanner. This version of the
Minolta TWAIN driver supports the following Minolta scanners:
2
•
MS 3000 Microform Scanner
•
MS 7000 Microform Scanner
•
MS 2000 Microform Scanner
•
PS 3000 Publication Scanner
•
MS 6000 Microform Scanner
•
PS 7000 Publication Scanner
This TWAIN driver and Overlay Manager Software may be freely copied and distributed for
use with Minolta Scanners sold in the United States of America or Canada. JFL Peripheral
Solutions Inc. of Ottawa, Ontario, Canada developed the TWAIN driver. For information
regarding distribution outside of the United States of America or Canada, please contact them
at:
JFL Peripheral Solutions
1007 Merivale Road, Suite 101
Ottawa, Ontario
K1Z 6A6
Voice: (613) 728-2521 x206
Fax: (613) 728-4459
Email:
info@jflinc.com
Hardware Installation
The Minolta scanners utilize industry standard 50-pin, male SCSI-1 (MS 3000, MS 2000, and
PS 3000) and SCSI-2 (MS 6000 and MS 7000) connectors. The PS 7000 uses a proprietary
cable sold only through Konica Minolta Business Solutions and is a 5-pin Mini Centronics on
the scanner end and a 50-pin HD SCSI-2 on the PC side. You will need to supply a standard
SCSI interface card for the PC as well as a SCSI cable. We have tested a wide range of SCSI
boards and have found that nearly all Adaptec or Adaptec-compatible boards will run fine. We
also recommend installing the latest version of Adaptec’s ASPI drivers.
If you have any connection errors please check for system conflicts first. If you are still unable
to resolve any hardware conflicts or cannot get your scanner to be recognized please contact
your local Minolta dealer. When calling for technical support please make sure to have the
driver version numbers and your system configuration information available.
A Note about Integrating Konica Minolta Business Solutions Scanners
For those customers who wish to directly integrate one of the TWAIN supported Minolta
scanner listed above with their own software, we recommend contacting JFL Peripheral
Solutions, Inc. to obtain their ObjectTWAIN
®
developer’s toolkit. This toolkit has all the
necessary tools to fully integrate our supported scanners.
Note: All sample scanned images in this guide are actual microfilm
scans and were enlarged by 200-250% to show detail at the pixel
level. They do not represent 1-to-1 resolutions.