Konica Minolta MS 2000, Инструкция по установке и эксплуатации

Страница: 37 / 59

Creating an Overlay
Creating an overlay is a fairly simple process yet can take some practice to perfect. To
illustrate the basic functionality let’s create a sample overlay in the following tutorial:
Step 1: Start a new overlay
Launch the Overlay Image Editor either by right clicking on the Overlay Monitor icon and
lecting Editor.. or by selecting Programs>Minolta Overlay Manager>Overlay Editor from
the overlay is fixed,
ou can stretch the width or height so long as the
in
ize cannot exceed 1.45 square inches. Thus an
verlay 7.86 inches long would be approximate .2
ering the size
f the overlay you will be required to enter the size in pixels. To determine the actual size in
inches simply divide the pixels by the designated resolution. Resolution should be set to match
se
the Windows Start Menu. Once the Image Editor is launched, select the File>New command
from the Editor menu bar or click the New icon (
shown above ).
Step 2: Define the size of the overlay.
While the total maximum size of
y
total area rema s constant. The width or height of
the overlay cannot be larger than 7.86 inches and the
total s
o
inches high while an overlay 1.5 inches wide would
be approximate 1 inch high. When ent
o