About
– Clicking this button will launch the About Dialog Box. This box contains
n 4 -The MS 7000 TWAIN Driver User’s Guide
The
pre
MS
e MS 7000 is set to operate in PC
mo
Mu
loca
Wh
is l
e scanners LED will change to a capital “C” to indicate that
pro
Th
Wh
acq
Inte
700
ntrols found in the
Driver’s UI are also duplicated on the front panel of the scanner and can be controlled from the
scanner itself. Since the front panel is mainly used for direct printing, some of the
nomenclature used between the driver and front panel may differ. Please see the appropriate
sections below to determine if UI settings are duplicated on the front panel and to determine
which buttons duplicate those commands.
important information including the current driver version number. This is the most
reliable means for determining which version of the driver you are running.
Sectio
MS 7000 is Minolta’s newest large-format Microform Scanner. It is very similar to its
decessor, the MS 3000, however it offers many new features.
In order to scan with the
7000 the user must ensure that the front panel of th
de
. The scanner can be configured for PC mode by pressing the Clear/Shift key and the
ltiple Print/PC keys at the same time. These two keys are adjacent to each other and are
ted just above the Start button on the front panel.
en in PC mode the scanner will display a capital “P” and a lower case “c”. Once the driver
unched the small “c” on th
a
per communication exists between the scanner and driver.
e MS 7000 Scanner Setup User Interface
en a software application (such as Adobe Acrobat
®
, Photoshop
®
, etc.) is instructed to
uire an image, it will launch the MS 7000 Scanner Setup Window. This is your User
rface (UI) for communicating to the TWAIN driver. It allows you to configure the MS
0 as you like prior to scanning. Please keep in mind that many of the co
Содержание MS 2000
Страница 52: ......
