Konica Minolta MS 2000, Инструкция по установке и эксплуатации

Страница: 4 / 59

stallation
lutions TWAIN driver and Overlay Manager software are
s
®
95, 98, NT 4.0, 2000, ME, and XP. To install either or
nch the Minsetup.exe file.
After agreeing to the software license and selecting the desired install directories, you will be
asked to choose which of the two components you would like to install.
TWAIN Data Source: Install the TWAIN data source when using the MS 2000, MS 3000,
PS 3000, PS 7000, MS 6000 or MS 7000 as PC-connected scanners. Please note that in
order to use the TWAIN data sources with the MS 6000 you need to have the optional PC-
upgrade kit installed. The PS 7000 requires you to purchase the PC Interface Kit. The
TWAIN data sources utilize Version 1.9 of the TWAIN specification and incorporate all
the scanning features of the supported scanners.
When installing the TWAIN Data source the installation procedure will automatically
launch the KMBS TWAIN configuration
utility.
This utility will scan your SCSI buses and
automatically detect any of the supported
Minolta scanners attached to your system. It
will then install the needed drivers (data
sources) associated with those scanners. Once
the configuration utility has completed its scan
and installs, it will launch a status window
showing all the connected Minolta hardware
and all installed drivers/data sources (
see Section 5 for more details ).
Make any necessary settings in the Status Window and close it out. You are now ready to
begin scanning. Since software packages vary, please check your application software for
instructions on how to acquire a scanned image using a TWAIN driver.
A new feature of the updated driver is allowing you to choose to not install the software
memory manager. Although this is still required for non Enhanced SCSI, it can be skipped
on current models thereby preventing possible memory conflicts and admin-right issues.
Overlay Manager: Install the Overlay Manager when using the MS 6000 or MS 7000 in
combination with the MSP 3000 laser printer. The Overlay software allows you to create and
add a bitmap to any prints made from the MSP 3000 laser printer and the MS 6000 or 7000.
In
order to utilize overlays with the MS 6000 or MS 7000 scanner you must ensure that the
latest version of firmware (25G003 or higher) is installed in your scanner.
If you are
unsure of your firmware version or need to upgrade please contact your authorized Minolta
dealer.
Section 2 –Software In
The Konica Minolta Business So
compatible with Microsoft Window
both of these applications simply lau