Konica Minolta MS 2000, Инструкция по установке и эксплуатации

Страница: 5 / 59

The TWAIN Driver User Interfaces
When developing the TWAIN drivers for Minolta’s scanners we tried to keep a consistent l
and feel across all models. Since each scanner has unique functions and features the drivers do
vary from model to model. In the following sections we walk through the MS 6000 and MS
00
ook
0 TWAIN drivers and explain what their various features and functions are as well as how
work with th ile working with a driver, you want a quick definition
of a given feature you can always left-click the mouse while holding the pointer over the
feature in que
ll window with information on that feature’s
functionality. Users of the MS 2000 and MS 3000 will find that nearly all the features of the
scanner’s TWA
7000 User’s G
Nearly all sele
ers are “sticky” and settings will remain unchanged if
e ed. Driver settings always take precedence over the scanner’s
er case “c”. Once the
®
, Photoshop
®
, etc.) are
nstructed to a w. This is
your User Inte o configure
the MS 6000 f the controls
anel of the scanner and can be
nel is also used for direct printing, some of
e nomenclature used between the driver and front panel may differ. Please see the
7
to
em. Remember that if, wh
stion. This will launch a sma
IN drivers are covered in the enclosed MS 6000 and MS 7000, PS 3000 and PS
uides as well.
ctions in the TWAIN driv
the driver is closed and reop n
front panel settings.
Section 3 - The MS 6000 TWAIN Driver User’s Guide
The MS 6000 is KMBS’ low-to-mid volume Microform scanner. It is very similar to its
predecessor, the MS 2000, however it offers many new features.
In order to scan-to-file with
e MS 6000 the user must ensure that the optional PC interface kit is installed and the th
front panel of the MS 6000 is set to operate in PC mode.
The scanner can be configured for
PC mode by pressing the clear/Shift key and the multiple print/PC keys at the same time.
These two keys are adjacent to each other and are located just above the Start button on the
front panel.
When in PC mode the scanner will display a capital “P” and a low
TWAIN driver is launched the small “c” on the scanner’s LED will change to a capital “C” to
indicate that proper communication exists between the scanner and driver.
The MS 6000 Scanner Setup User Interface
hen most off-the-shelf software applications (such as Adobe Acrobat W
i
cquire an image they will launch the MS 6000 Scanner Setup Windo
rface (UI) for communicating to the TWAIN driver. It allows you t
as necessary prior to scanning. Please keep in mind that many o
he front p found in the driver’s UI are also duplicated on t
controlled from the scanner itself. Since the front pa
th
appropriate sections below to determine if UI settings are duplicated on the front panel and to
determine which buttons duplicate those commands.