Konica Minolta MS 2000, Инструкция по установке и эксплуатации

Страница: 10 / 59

Rewind – This button will cause the currently loaded roll of film to be completely rewound
and ejected.
This number will match the one shown on the MARS
unit’s LCD. In addition, users can enter a desired frame number in this window and hit the
set key. The MARS controller will then move the blipped film to the entered frame
? – Clicking this button will open a message window showing the current status of the
age Adjustment Controls
low you to make decisions that will alter the appearance of a
n down into the standard controls and the advanced
age Type mode set, this setting will cause the
> – This button will cause the currently loaded film to be advanced by one blip mark.
< – This button will cause the currently loaded film to be rewound by one blip mark.
Frame Number Box – The frame number box will display the current frame number as
reported by the MARS controller.
number.
Set – pressing the set key will move the blipped film to the entered frame number.
MARS controller.
When no MARS controller is connected to the PC these buttons will be grayed out and inactive
(as shown above).
Im
The Image Adjustment controls al
scanned image. These controls are broke
controls.
Original is Photo – Depending on the Im
scanned images to be affected as follows:
Black & White – Will tend to lighten the final image through a wider dithering process.
of the original but will typically over-lighten This helps enhance the tonal quality
black/text areas.