1
4
5
6
2
3
4
5
Instruction manual SMV 10 600B – 60 1500B Publ. no. 6196.082 1117, Version 02
83
Service and maintenance
SMV 18-60
WARNING
The mast and the unit are heavy and must be
handled with the outmost care.
Danger of serious personal injury or damage to
vehicle. Ensure that the mast and the carriage are
secure as they must be raised for certain
lubrication items.
• Grease the nipples on the mast suspension (1), one on each side.
These are accessible through the inside of the mast when the
carriage is raised. Release the shaft pegs by lifting the mast either
using a jack or a piece of wood and tilt it forwards.
• Grease the tilting cylinders (2) in the middle of the shaft pegs,
two on each side. Release the shafts by tilting the mast
backwards.
• The upper support rollers (3) are accessible when the mast is
somewhat raised. One nipple on each side.
• Grease the rollers (4) on the carriage from the inside of the
carriage, two on each side (sliding bearings).
• Grease the wheels on the carriage (5) from the inside, two on
each side.
• The corresponding rollers and wheels of the inner mast are
reached by raising the carriage.
• Grease the chain wheels (6) through the nipples.
WARNING
Do do not apply too much grease on the support
rollers. Too much grease in the mast channels will
make the rollers and wheels glide rather than roll.
The lubrication points may vary between
different types of masts.
