2
Instruction manual SMV 10 600B – 60 1500B Publ. no. 6196.082 1117, Version 02
Your machine from Konecranes
YOUR MACHINE FROM KONECRANES
LIFTTRUCKS
This user manual tells you all you need to know about
starting, driving, servicing and maintaining your machine
from Konecranes Lifttrucks.
Correct maintenance and operation will preserve the
machine over a long and profitable operational life time and
will utilise its features.
The phrases "front", "rear", "right" and "left" refer to the
position in which the component in question is installed as
viewed from the driver's seat.
Adhere to all the suggestions in the manual for the operation
of the machine and perform the maintenance and
inspections that are prescribed in the maintenance schedule,
regularly and on time using the specified lubricants.
Operation and maintenance must only be performed by
qualified staff. The working environment instructions must
always be adhered to.
In particular, we wish to point out the importance of
adhering to both general traffic regulations and the
guidelines that are necessary for a safe use of the machine
and for the prevention of work-related accidents.
The regulations that are applicable to the use of industrial
machines must be strictly adhered to by the work managers,
drivers and maintenance staff.
The responsibility for any risks that may occur when using the
machine for applications for which it has not been approved
rests with the user and not Konecranes Lifttrucks. The
intended use of the machine is clear from its EC assurance.
Konecranes Lifttrucks are constructed for transport and
lifting of such loads as stated on the lifting capacity plate. No
alterations, and in particular no additions or modifications,
may be performed on the machine without the approval of
the manufacturer.
For any optional equipment, please refer to the the user
instructions issued by the manufacturer.
TECHNICAL REMARK
For questions on machines from Konecranes Lifttrucks and
when ordering spare parts, contact your nearest authorised
dealer. Please make sure you state the correct delivery address.
For any repairs, please only use Konecranes Lifttruck original
spares. This is a prerequisite for ensuring that your machine
from Konecranes Lifttrucks shall maintain its original
technical standard.
When ordering spare parts, it is important that you state the
part number given in the spare parts list and also the
following information:
• Machine designation:
• The serial number/year of manufacture of the machine:
• Delivery date:
When ordering parts for the following units, their individual
manufacturing number should be stated:
• Engine no.:
• Mast/boom no.:
• Mast/boom lifting height:
• Hydraulic pump no.:
• Transmission no.:
• Drive axle no.:
(The individual numbers are stated on the machine card.)
When the machine is delivered, the details on the machine
type plate should be written down in this user manual.
DELIVERY INSPECTION
Every machine from Konecranes Lifttrucks is checked very
carefully before leaving the factory in order to ensure that it
is in good condition and fully equipped as per the order.
Authorised Konecranes Lifttrucks dealers are then obliged to
inspect the machine once more prior to delivery to the
customer.
In order to avoid later complaints and problems, the
customer should also inspect the machine to ensure that it is
in fully operational condition and fully equipped at the
point of delivery and sign for the receipt of the machine
from the dealer.
Always perform maintenance, lubrication, checks and daily
inspections in accordance with the instructions in this book.
Prior to taking the machine into use, the inspection points in
accordance with the warranty/delivery report must be
inspected.
The warranty/delivery report must be filled in and returned
to Konecranes Lifttrucks within a week after the first time of
use in order for the warranty to be valid from the first time of
use. If the warranty/delivery report is not returned within
a week, the warranty is valid from the day the machine was
delivered from Konecranes Lifttrucks.
The following technical manuals are enclosed with every
machine:
• 1 Spare parts catalogue
• 1 Instruction book
• 1 Driver user manual
• 1 Machine card
When contacting your authorised dealer, please always state:
• Machine designation
• Machine serial number
• Year of Manufacture
Instruction manual SMV 10 600B – 60 1500B Publ. no. 6196.082 1117, Version 02
