Instruction manual SMV 10 600B – 60 1500B Publ. no. 6196.082 1117, Version 02
81
Service and maintenance
Start of hydraulic pump
When maintenance work on the pump of the hydraulic system has
been completed, the pump should be started as per the following:
Hydraulic pump, alternative 1
• Loosen the plug (1).
• Fill the pump housing with hydraulic oil.
• Fit the plug (1).
• Start the engine and raise the fork carriage.
Hydraulic pump, alternative 2
• Loosen the hose connectors (1) and (2) and plug (3).
• Fill the pump housing with hydraulic oil.
• Fit the hoses (1) and (2) and plug (3).
• Start the engine and raise the fork carriage.
Any jarring noises should disappear with a few seconds of running.
If not – stop the engine and review the hydraulic system for faults.
