58
Instruction manual SMV 10 600B – 60 1500B Publ. no. 6196.082 1117, Version 02
Service and maintenance
Tightening of wheel nuts
WARNING
The torque of the wheel nuts must be checked
daily for the first 14 days, or until the wheels,
clamps and nuts have been tightened and no
further retightening is possible. This must be done:
• after new delivery of a machine
• after first use of the machine
• after the removal or replacement of a wheel
The nuts are tightened cross-wise to the torque as per below.
Wheel nuts driving shaft
SMV 10-16
M22 x 1.5
10.9
650 Nm
SMV 18-60
M18 x 2
10.9
350 Nm
Wheel nuts steering shaft
Steering axle
M22 x 1.5
8.8
400 Nm
Engine mounts
Check the condition of the rubber mounts.
If any wear is discovered, replace the damaged parts.
The engine mounts can be reached from the engine bay, one on
each side of the rear of the engine.
(1)
M20
8.8
385 Nm
(2)
M16
8.8
197 Nm
(3)
M16
8.8
197 Nm
(4)
M16x1.5
10.9
277 Nm (Scania)
M16x2
10.9
277 Nm (Volvo)
Transmission
Check the conditions of the rubber mounts and the brackets.
If any wear is discovered, replace the damaged parts.
The brackets (one on each side of the transmission), can be
reached from the engine bay.
(1)
M20
8.8
385 Nm
(2)
M16
8.8
197 Nm
(3)
M20
8.8
385 Nm
(4)
M16
8.8
197 Nm
