RECOMMENDED FUELS AND HYDRAULIC OILS
Diesel fuels
Only use fuel which fulfil DIN 51601 with a CET-value that
does not fall below 45.
The sulphur level of the diesel fuel must not exceed 0.3%. If
the sulphur level exceeds 0.3%, the service intervals of the
maintenance schedule must be halved.
For higher levels, contact the manufacturer of the machine or
the lubricant.
NOTE
As the surrounding temperature decreases, the flow characteristics of
the diesel fuel deteriorate to a point where paraffin is being secreted.
If "summer quality" diesel fuel is being used, this may cause
problems when running. For this reason, diesel fuel of "winter
quality", which can sustain the cold better and functions reliably
down to -15°C, should be used during the cold part of the year.
The use of so-called flow improving additives is not
recommended. These may worsen the cold starting ability.
Transmission oil
DANA:
ATF Dexron III
ZF:
Mineral oil based engine oil (API CD/CE/CF-4/CF/CG-4/
CH-4/CI-4/SF/SG/SH/SJ/SL or ACEA, categories A, B, E)
Viscosity degrees: SAE 20W-20 / 30 / 10W-30 / 10W-40 /
15W-30 / 15W-40 / 20W-40
Oil replacement intervals
Empty and refill the system every 1,000th operational hour in
order to maintain maximum function with the least possible
impact on the environment. Long-term high operating
temperatures or very dusty environments lead to reduction of
quality in the oil and an increased impact on the environment.
Drive axle oil
API GL.5 SAE 80W-140
NOTE
The above are only recommendations. If in doubt, we recommend
that you seek the advice of the Konecranes Lifttrucks dealer.
Hydraulic oil
Universal Tractor Transmission Oil (UTTO)
The oil must fulfil one of the requirements below:
• John Deere
JD20C
• Massey Ferguson
MF1141/MF1135/ MF1143
• ZF
TE-ML 03E/TE-ML 05F/TE-ML 06K
It is also possible to use a hydraulic oil with the specifications
below.
DIN 51524 Part 2 HLP and Part 3 HVLP
with 1.5% LUBRIZOL added.
Use hydraulic fluids for mobile use from a well-known oil
manufacture.
Grease
Universal grease type E.P. as per NLGI grade 2.
Coolant
Only use ethylene glycol based cooling liquids with a corrosion
inhibiting additive.
Do not mix with antifreeze containing ethanolamine.
Viscosity
Temperature range
SHS 32
-30°C – +10°C
SHS 46
-20°C – +50°C
SHS 68
±0°C – +50°C
Antifreeze mixture for
the lowest temperature
°C
% Volume mixture
antifreeze
Mixture antifreeze/water
-12
25
1:3
-18
30
1:2
-25
40
1:1.5
-37
50
1:1
-60
66
2:1
102
Instruction manual SMV 10 600B – 60 1500B Publ. no. 6196.082 1117, Version 02
Fuel and oil recommendations
