Komatsu PC350LC-8, Руководство по эксплуатации и техническому обслуживанию

Страница: 48 / 502

SAFETY MACHINE OPERATION
SAFETY
2-26
SAFETY RULES FOR TRAVELING
q
When traveling on level ground, keep the work equipment
at a height of 40 to 50 cm from the ground.
q
If the work equipment blocks the view and it is difficult to
travel in safety, raise the work equipment to a greater
height.
q
When traveling on rough ground, travel at low speed and
do not operate the steering suddenly. There is danger that
the machine may turn over. The work equipment may hit
the ground surface and cause the machine to lose its bal-
ance, or may damage the machine or structures in the
area.
q
When traveling on rough ground or steep slopes, if the
machine is equipped with auto-deceleration, always turn
the auto-deceleration switch OFF (cancel).
q
Avoid traveling over obstacles when possible. If the
machine has to travel over an obstacle, keep the work
equipment close to the ground and travel at low speed.
Never travel over obstacles which make the machine tilt
strongly to one side.
q
When traveling or carrying out operations, always keep a
safe distance from people, structures, or other machines to
avoid coming into contact with them.
q
When passing over bridges or structures, check first that
the structure is strong enough to support the weight of the
machine.
q
When operating in tunnels, under bridges, under electric
wires, or other places where the height is limited, operate
slowly and be extremely careful not to let the work equip-
ment hit anything.
TRAVELING ON SLOPES
To prevent the machine from tipping over or slipping to the
side, always do as follows.
q
Keep the work equipment approx. 20 to 30 cm above the
ground. In case of emergency, lower the work equipment to
the ground immediately to help stop the machine.
q
When traveling uphill, set the machine with the operator's
seat on the uphill side; when traveling downhill, set the
operator's seat on the downhill side. Check that the
ground under the machine is safe when traveling.