Komatsu HB365LC-3, Руководство по эксплуатации и техническому обслуживанию

Страница: 145 / 506

Perform the setting for the attachment 2.
Ask your Komatsu distributor to have the monitor setting changed so that two attachments are available if the
attachment 2 system is to be equipped.
The oil flow rate in ATT mode can be adjusted according to the installed attachment. Use the setting menu for
the attachment 2 if the machine is equipped with the attachment 2 system.
Changing “Attachment Oil Flow Rate Setting”
1.
When attachment 2 is set, the oil flow in “2-Way Attach-
ment Oil Flow Rate Setting” screen is as shown in the right
figure. Select the oil flow setting to be changed and press
the switch F2.
(a): Oil flow rate in attachment 1
(b): Oil flow rate in attachment 2
2.
“2-Way Attachment Oil Flow Rate Setting” screen is dis-
played.
On “2-Way Attachment Oil Flow Rate Setting” screen, you
can perform the following operations with switches F1 to
F6.
F1: Switches the display from attachment 2 oil flow setting
screen to attachment 1 oil flow setting screen.
F2: Switches the display from attachment 1 oil flow setting
screen to attachment 2 oil flow setting screen.
F3: Decreases the flow rate by 1 level.
F4: Increases the flow rate by 1 level.
F5: Returns the screen to “Breaker Setting” screen without
changing the flow rate.
F6: Validates the flow rate, and returns the screen to
“Breaker Setting” screen.
(X): Current oil flow rate setting
(Y): Min. adjusted oil flow rate
(Z): Max. adjusted oil flow rate
• The guidance icon “ATT2” (c) is displayed on the at-
tachment 1 oil flow setting screen, and the guidance icon “ATT1” (d) is displayed on the attachment 2
oil flow setting screen.
• Flow rate cannot be changed at “No Attachment” setting.
OPERATION EXPLANATION OF COMPONENTS
3-73