Kobold Heinrichs Coriolis Mass Flow Meter, Инструкция по установке и эксплуатации

Страница: 45 / 118

Heinrichs Messtechnik GmbH
OPERATING MANUAL TMU-W / UMC4 Page 45 of 118
Functional classes, functions and parameters
Functional classes are written in all upper case letters (headings). The functions beneath each functional
class are written in upper and lower case.
The various functional classes and functions are describes in Section 7.2, “UMC4 transmitter function”
starting on page 47.
The lower line contains the following elements:
-
Informational texts
- YES/NO answers
- Alternative values
- Numerical values (with dimensions, if applicable)
- Error messages
If the user attempts to modify values for any of these parameters without entering the required password,
the message “Access denied” will be displayed (see also 7.1.2, “Operating modes” on page 43 and 7.1.5.3,
“Passwords” on page 46).
7.1.5.1 Selection window/make a selection
In the selection window, the first line of the LCD always contains the heading, while the second line displays
the current setting. This setting is shown in square brackets if the system is in Programming mode.
Function name
[Selection]
In Programming mode (see 7.1.2, “Operating modes” on page 43), i.e. after a password has been entered
(see 7.1.5.3, “Passwords” on page 46), the operator can navigate to the desired setting by using the

key
or the

key and the operator can then confirm your selection by pressing “Enter“. To retain the current
setting, press “Esc”.