55
8.8 Knife contour
Figure 8-22 shows the knife contour, calculated from the content of the “.csv” file.
1
“F2 Axial Runout”: Shows the axial runout determined by the measuring gage
2
“F3 Contour Deviation”: Shows the measured deviation
3
“F5 Knife Contour”: Shows the original knife contour
4
“F6 Front Grinding Wheel”: Shows the start / end offset of the contour relative to the front
grinding wheel
5
“F7 Rear Grinding Wheel”: Shows the start / end offset of the contour relative to the rear
grinding wheel
6
“F8 Serration Unit”: Shows the start / end offset of the contour relative to the serration unit
7
“F9 Polishing Unit”: Shows the start / end offset of the contour relative to the polishing unit
8
“F12 Back”: For going back to the previous screen
8. Control system
Figure 8-22
Knife contour
1
2
3
4
5
6
7
8
