30
Figure 6-3
Control panel
1
Set the main switch (3-7/2) to “I”. Wait for the
controls to initialize.
When the “Control ON” button (6-3/1) starts flash-
ing, switch on the control unit with the “Control
ON” button (6-3/1).
ATTENTION
Do not press the “START” button (3-8/4)
under any circumstance.
Check the direction of rotation of the coolant
pump.
The direction arrow (6-4/1) indicates the direction
of rotation of the coolant pump.
If required, interchange the phases in the power
plug
6. Commissioning
1
Figure 6-4
Checking the direction of rotation
