38
Switch on the rear grinding wheel (7-15/1) by
pressing the “On” button (7-13/2) in the “Manual
Functions” of the touch panel and dress in the
same way as described above.
7.5 Changing the front / rear grinding wheels
Close the safety doors.
Go to the general manual functions via the “F9
Manual Functions” (3-9/15) main menu. Move the
grinding wheels to dressing position by pressing
the “Start” button (7-16/1) on the touch panel.
Open the safety doors.
ATTENTION
Turn the “Setting Mode” key switch
(3-8/9) to “1” position (1 h).
Use SW6 Allen wrench to loosen and remove the
screw in the center of the grinding wheel (7-17/1)
by turning it counter-clockwise.
Remove the front or rear grinding wheel as well
as any connection flange (7-18/1) and mount the
new grinding wheel in reverse sequence of steps.
7. Operation
Figure 7-15
Dressing the rear grinding wheel
1
Figure 7-16
Manual functions
1
Figure 7-17
Changing the grinding wheels
1
