46
8. Control system
Figure 8-6
Holder plate axes
Figure 8-7
Grinding wheel angles
The horizontal movement of the holder plate is
the X axis (8-6/2). The vertical movement is the Z
axis (8-6/3).
The rotatory movement of the holder plate is the
B axis (8-6/1).
The master axis is a virtual axis and cannot be
controlled manually.
The angle movement of the rear grinding wheel is
called “Grinding back” (8-5/11). The angle move-
ment of the front grinding wheel is called “Grind-
ing front” (8-5/10).
For manual movement of the axes, select the
desired axis on the touch panel. The selected axis
is highlighted in blue.
Then move the axis with “F1 –” (8-5/1), “F3 +”
(8-5/3) and “F2 ~” (8-5/2).
+
+
+
–
–
–
3
1
2
