50
Figure 8-13
“Steps” grinding data
8. Control system
8.4.5 Steps
“Tool”: Selection of the abrasives
“Feed”: Number of feeds that are used for this
step
“Angle Wkz 1 (front)”: Angle adjustment of front
grinding wheel
“Start Offset Wkz 1 (front)”: Distance at which
the front grinding wheel is applied on the knife at
contour start
“End Offset Wkz 1 (front)”: Distance at which the
front grinding wheel is applied on the knife before
contour end
“Angle Wkz 2 (rear)”: Angle adjustment of rear
grinding wheel
“Start Offset Wkz 2 (rear)”: Distance at which
the rear grinding wheel is applied on the knife at
contour start
“End Offset Wkz 2 (rear)”: Distance at which the
rear grinding wheel is applied on the knife before
contour end
“Y Offset Grinding Wheel Adjustment”
“Start Offset Knife Contour”
“End Offset Knife Contour”
“Circular Knife Rotation Direction”: 0 = left,
1 = right
“Distance from Tool before Processing”
8.4.6 Feed
“Cycles” Number of grinding processes which are
executed with this feed
“Position”: Knife distance from grinding wheel
during the grinding process. Decisive for this are
the tool positions that are entered for the respec-
tive tool in the machine data (“+”” = away from
the tool, “–” = towards the tool).
Figure 8-14
“Feed” grinding data
