Knauer Azura P 6.1L, Руководство пользователя

Страница: 16 / 69

KNAUER P 6.1L User Manual V6890 Version 1.2
17 Installation
Unpacking
Prerequisite Check packaging for damage caused during transportation.
Tool Utility knife
CAUTION!

Damage to the device by lifting on protruding
housing parts.

Lift the device on the side of the housing only.
Next steps Store packaging and keep the included packing list for repeat
orders.
Capillary and Fittings
All tubing and capillary, which connect the components of the
pump, are pre-installed. Only the solvent bottles have to be con-
nected and the pump has to be integrated into the flow of the
HPLC system.
Connecting the Solvent Bottles
To connect the solvent bottles, tubing with pre-installed solvent
filters is used. The tubing is connected to the device with flange-
less fittings.
Note Do not use tools so as to not damage the fittings.
Procedure Process
1. Set-up the package in such a way that you can read the
label. Using the utility knife, cut the adhesive tape and
open the packaging.
2. Remove the foam insert. Take out the accessories kit and
the manual.
3. Open the accessories kit and check the scope of delivery. In
case any parts are missing, contact the Technical Support.
4. Clasp the device from below, lift it out of the packaging
and place it on its feet. Do not hold onto the front cover.
5. Check the device for signs of damage that occurred during
transport. In case you notice any damage, contact the
Technical Support.
6. Place the device in its site of operation and remove protec-
tive foil.