Knauer Azura P 6.1L, Руководство пользователя

Страница: 49 / 69

KNAUER P 6.1L User Manual V6890 Version 1.2
50 Maintenance and Care
Next steps Dismount the pump head.
Dismounting the Pump Head
Prerequisite

The pump head has been purged.

The tubes at the inlet and outlet have been removed.

The pump head's inlet and outlet have been sealed with cap
fittings.
Tools

Allen wrench

Open-end wrench, size 1/4"

Open-end wrench, size 13
WARNING!

Aggressive or toxic solvent residue can irritate
the skin!

Wear protective gloves.

Flush the pump head before exchanging it.
CAUTION!

Damage to the pump head by residual chemicals.

If the pump head is stored and re-used later,
flush it and fill it with isopropanol. Afterwards,
seal the inlets and outlets with cap fittings.
CAUTION!

Damage to the pistons if they tilt.

Undo or tighten diagonally opposite screws
evenly by one turn each at a time.
Procedure Process
1. Fill the flushing solution into a syringe and inject into the
capillary at the pump head inlet. Leave it for 5 minutes.
2. Rinse with water.
3. Flush the pump head with isopropanol.
4. Seal the inlets and outles with cap fittings.
Procedure Process Figure
1. Loosen the capillary
connectors
1
at the
outlet. Remove the cap-
illary.
1. Fixate the outlet fitting
1
with an open-end
wrench (size 13).
2. Loosen the fitting
2
with an open-end
wrench (size 1/4").
Fig. 33 Fitting at the outlet of
the pump head
1
2