Knauer Azura P 6.1L, Руководство пользователя

Страница: 27 / 69

KNAUER P 6.1L User Manual V6890 Version 1.2
28 Installation
2. Double-click on LAN Connection .
3. Click on the button Properties .
4. Select Internet Protocol version 4 (TCP/IPv4) .
5. Click on the button Properties .
6. Check the settings in the tab General . The correct settings for
the DHCP client are:

a) Obtain IP address automatically

b) Obtain DNS server address automatically
7. Click on the button OK .
Connecting the Cables
A router has several LAN ports and one WAN port that can be
used to integrate the LAN into a wide area network (WAN), e.g.
a company network or the Internet. In contrast, the LAN ports
serve to set up a network from devices and a computer. To
avoid interference, we recommend operating the HPLC system
separately from the company network.
You will find patch cables for each device and the router in the
accessories kit. To connect the router to a WAN, an additional
patch cable is required, which is not supplied within the scope
of delivery.
Prerequisite

The computer has been switched off.

There is a patch cable for each device and the computer.
Procedure 1. Use the patch cable to connect the router and the computer.
Repeat this step to connect all devices.
2. Use the power supply to connect the router to the mains
power system.
1
Modules
2
Router
3
LAN ports
4
WAN port
5
Workstation
Fig. 26 Cabling system LAN
1 2 3
4
5