Kinova Link 6 Скачать руководство пользователя страница 270

Страница: 270 / 296

EN UG-020 Link 6 user guide r1.0

262

Quarterly maintenance

Always perform quarterly tasks every three months to avoid downtime of the robot.

Table 101: Quarterly checks for preventive maintenance

Validation task

Corrective action

Check the main power is secured to the controller.

Reattach the latch.

Check all connected safety inputs and outputs are

secured and functioning.

Contact support at [email protected].

Check the cable and connector of the Teach

pendant are in good shape.

Contact support at [email protected].

Torque check the base fastener.

Retorque.

Torque check the wrist fastener and end effector

tooling.

Retorque.

Make sure the actuator covers are not loose.

Retorque.

Check that the fan in the controller is rotating freely. Contact support at [email protected].

Yearly maintenance

Always perform yearly tasks every year to avoid downtime of the robot.

Table 102: Yearly checks for preventive maintenance

Validation task

Corrective action

Check Protective earth grounding resistance is less

than 0.1 Ω to the controller.

Replace the cable.

Check Protective earth grounding resistance is less

than 0.1 Ω to the arm.

Replace the cable.

Unscheduled maintenance

Even by following a maintenance schedule, unexpected maintenance is required.
Some of the unscheduled maintenance tasks are also scheduled maintenance tasks under

certain circumstances. For instance, when there is a sudden power outage or when an accident

happens with the robot, it is recommended to perform a visual inspection of the robot.

Table 103: Unscheduled maintenance tasks

Validation task

Corrective action

Cables are in good condition with no rips, tears, or

frays.

Contact support at [email protected].

Make sure the joint caps are on the robot. Also,

make sure there are no visible gaps and that they

are secured in place.

Contact support at [email protected].

+1 514-277-3777

kinovarobotics.com

Содержание Link 6






































































































































































































































































































Результаты поиска

Содержание Link 6

Отзывы:

Похожие инструкции для Link 6

Бренды по названию

Популярные бренды

Kinova Link 6, Руководство пользователя

Результаты поиска

Содержание Link 6

Отзывы:

Похожие инструкции для Link 6

Бренды по названию

Популярные бренды