Kinova Link 6 Скачать руководство пользователя страница 269

Страница: 269 / 296

EN UG-020 Link 6 user guide r1.0

261

Preventive maintenance

Always perform preventive maintenance within the time scheduled maintenance time frame to

avoid downtime of the robot.
Different parts of Link 6 require maintenance checks on a daily, weekly, quarterly, or yearly

schedule. Some preventive maintenance does not adhere to a specific schedule.

Daily maintenance

Always perform daily tasks daily to avoid downtime of the robot.

Table 99: Daily checks for preventive maintenance

Validation task

Corrective action

Check the emergency stop functions as expected.

Contact support at [email protected].

Check all states of the 3-position enabling device

function as expected if it is expected to be used.

Contact support at [email protected].

Check all terminal connections are secured.

Redo connections.

Check the cables are in good condition with no rips,

tears, or frays.

Contact support at [email protected].

Check the robot joint caps are installed properly on

the robot with no visible gaps and secure.

Contact support at [email protected].

Check the tools and accessories are attached

correctly and are not loose.

Secure the tools and accessories.

Check the joints are not loose.

Contact support at [email protected].

Check the bolts on the base are tightened according

to the specifications and the base does not move

when the robot moves.

Secure the base of the arm.

Check the casing of the controller is closed, with no

openings along the edges or elsewhere.

Contact support at [email protected].

Check the I/O panel on the controller is closed.

Close the panels on the controller.

Check the end caps are on all electrical connectors

that are not in use.

Place end caps on all exposed electrical

connectors.

Check the environment is the same as usual, with

no additional objects in the area.

Remove objects that normally are not in the

environment.

Weekly maintenance

Always perform weekly tasks weekly to avoid downtime of the robot.

Table 100: Weekly checks for preventive maintenance

Validation task

Corrective action

Check the air filter in the controller is clean.

Replace the air filter.

+1 514-277-3777

kinovarobotics.com

Содержание Link 6






































































































































































































































































































Результаты поиска

Содержание Link 6

Отзывы:

Похожие инструкции для Link 6

Бренды по названию

Популярные бренды

Kinova Link 6, Руководство пользователя

Результаты поиска

Содержание Link 6

Отзывы:

Похожие инструкции для Link 6

Бренды по названию

Популярные бренды