K’NEX Dancing Robot
C
opyright © K’NEX User Group 2008
Page: 1
K’NEX Dancing Robot
The K'NEX Dancing Robot kit includes 2 x K'NEX Control Motor, and all the K'NEX parts needed to build the robot.
In addition to the kit, you will need either:
1. Learn & Go computer control box, with a battery holder and 4 x "C" batteries, or
2. Egg-Box computer control box, with a battery holder and 4 x "C" batteries.
If you buy your Learn & Go from us, you will receive a free 4 x "C" battery holder.
Note that the instructions provided in this section consist only of a series of photographs of the part-completed and
finished models. Please email us if you feel that any stage of the assembly process is unclear.
<< Stage 1
First, build the three sub-assemblies shown in the photo.
Note that the lug on the Tan Interlocking clip fits inside one of the small holes in the wheel, so that when
the rod is rotated, the wheel is also rotated.
Stage 2 (x2) >>
Then, for each motor, push the blue rod in the
wheel/axle sub-assembly right through the central hole
in the motor.
