Kikusui RC04-PCR-LA, Руководство по эксплуатации

Страница: 43 / 102

RC04-PCR-LA Operation Method 4-23
Sequence Setting Mode Operating Procedure
• Select the AC, DC, or AC + DC mode for voltage output. (See
"Output Voltage Setting Procedure" on page 4-5.)
1. Press the ESC key to call the Home Position.
2. Press the S-EDIT (SHIFT, SEQ).
The PCR-LA power supply will enter the key-lock mode automatically.
This causes the
fi rst display to appear, as follows.
The display can be switched in the order of the fi rst to fourth dis-
plays whenever the MENU key is pressed.
To return to the previous display, press the (SHIFT, MENU) keys.
3. Use the F1 to F5 function keys to move the cursor to the
desired item.
Enter a value using the numeric keys or JOG/SHUTTLE (for entry
using the numeric keys, press the ENTER key to con fi rm the value).
For the change characteristics, each time the relevant function key
is pressed, “R” (run) and “S” (step) are switched alternately.
4. Press the MENU key to display the second display.
5. Set each item in the same way as in step 3.
When the F3 key is pressed, the display changes as shown below.
When the ESC key is pressed, the display below returns to the
second display.
The time indication in the center of the display changes as shown
in the table when the relevant function key is pressed.
(First display)
1 5 0 . 0 0 H z 0 . 0 V
A D R S R F R Q S V a c
F1 F2 F3 F4 F5
(Second display) 1 0 m 1 s W 0 0
A D R S T I M E WA V E
F1 F2 F3 F4 F5
0 . 0 0 0 s
H O U R M I N S E C
F1 F2 F3 F4 F5
Key Indication
F1 0h0m
F3 0m0s
F5 0.000s