RC04-PCR-LA
Operation Method 4-39
2. Press the WAVE key.
The PCR-LA power supply will enter the key-lock mode automat-
ically.
3. Press the MENU key to select the display and change the
displayed waveform banks.
Three displays are provided. These can be selected in turn when-
ever the MENU key is pressed.
To return to the previous display, press the (SHIFT, MENU) key.
4. Press one of the F1 to F5 keys to select the waveform bank
you wish to output.
5. This activates the ENTER wait status. Press the ENTER
key to initiate operation.
Set OUTPUT to ON (if OUTPUT is not already ON) to output the
selected waveform. When any waveform bank other than “W00”
is selected, “3” lights in the PCR-LA AC power supply S-MODE
area. To return the waveform to ordinary status (sine wave), select
W00.
6. Press the ESC key to return to the Home Position and exit
the special waveform output mode.
This will cancel the key-lock mode in the PCR-LA power supply.
Pressing the ESC key on the PCR-LA power supply also allows
you to exit the special waveform output mode in the same way.
• The waveform always switches to the selected one after com-
pleting a single cycle.
Fig.4-18
Waveform Switching
S I N
S I N
S I N
S I N
S I N
W 0 0
W 0 1
W 0 2
W 0 3
W 0 4
F1
F2
F3
F4
F5
NOTE
the waveform actually changes at this point.
Even if a waveform bank is selected here,
Содержание RC04-PCR-LA
Страница 1: ...RC04 PCR LA Part No Z1 002 902 IA002963 Jan 2007 OPERATION MANUAL REMOTE CONTROLLER PCR LA Series...
Страница 10: ...1 4 General RC04 PCR LA...
Страница 78: ...7 4 Specifications RC04 PCR LA 7 2 Dimensions Fig 7 1 Dimension of RC04 PCR LA 40 MAX 55 128 180 Unit mm...
Страница 100: ...A 22 Appendix RC04 PCR LA...
