Keysight Technologies E5260 Series, Руководство по программированию

Страница: 209 / 350

Keysight E5260/E5270 Programming Guide, Edition 4 4- 25
Command Reference
Command Reference
AZ
This command is available for the Keysight E5270B, and is used to enable or
disable the ADC zero function that is the function to cancel offset of the
high-resolution A/D converter. This function is especially effective for low voltage
measurements. Power on, *RST command, and device clear disable the function.
This command is effective for the high-resolution A/D converter, not effective for
the high-speed A/D converter.
Execution
Conditions
This command is not available for the Keysight E5260 series.
Syntax
AZ mode
Parameters mode : Mode ON or OFF.
0: OFF. Disables the function. Initial setting.
1: ON. Enables the function.
Remarks Set the function to OFF in cases that the measurement speed is more important than
the measurement accuracy. This roughly halves the integration time.
Example
Statements
OUTPUT @E5270;"AZ 0"
BC
The BC command clears the output data buffer that stores measurement data and
query command response data. This command does not change the measurement
settings.
NOTE Multi command statement is not allowed for this command.
Syntax
BC
Example
Statements
OUTPUT @E5270;"BC"