Keysight Technologies E5260 Series, Руководство по программированию

Страница: 253 / 350

Keysight E5260/E5270 Programming Guide, Edition 4 4- 69
Command Reference
Command Reference
37 : Returns the quasi-pulsed source settings:
BDM detection interval [, mode ];
BDT hold time , delay time
[;BDV chnum , range , start , stop [, Icomp ]]<CR/LF^EOI>
38 : Returns the digital I/O port information:
ERM input pin ;ERC2, value <CR/LF^EOI>
39 : Not used.
40 : Returns channel mapping information:
If multiple channel numbers are translated to another numbers.
ACH actual , program
[;ACH actual , program ]
:
[;ACH actual , program ]<CR/LF^EOI>
If no channel number is defined by the ACH command.
ACH<CR/LF^EOI>
41 to 45 : Not used.
46 : Returns SMU measurement operation mode settings:
CMM chnum , mode
[;CMM chnum , mode ]
:
[;CMM chnum , mode ]<CR/LF^EOI>
47 to 49 : Not used.
50 : Returns the linear search measurement settings:
LSM abort , post ;LSTM hold , delay ;LSVM mode ;
[;LGI chnum , mode , Irange , Itarget ] or
[;LGV chnum , mode , Vrange , Vtarget ]
[;LSV chnum , range , start , stop , step [, Icomp ]] or
[;LSI chnum , range , start , stop , step [, Vcomp ]]
[;LSSV chnum , polarity , offset [, Icomp ]] or
[;LSSI chnum , polarity , offset [, Vcomp ]]
<CR/LF^EOI>