R AD AR
7
1.3
1.4
Precautions of setting and operating preparation
(1)
(2)
(4)
(5)
(7)
(6)
(3)
The preparation of replacing for parts should be carefully completed.
The operator should use the "JOG" mode to check for new operations when start a
new processing procedures.
The operator should pay attention to all safety conditions when replacing the turret tool.
Should be carefully to plan the movement routes when two operators co-operate the
machine.
The operator should use the crane to avoid potential danger when perform the
work-piece lifting.
The operator should exercise every step before starting formal cutting operation.
Notice the following conditions as checking the machine without cover sheet.
a.
b.
The operator's clothing or other components may be involved in the spindle and
results in Injury as checking this machine, stands away from the machine to ensure
that the clothing will not be involved in the spindle or other components.
Should do idling test without work-piece as perform the first checking operation.
When a work-piece fixed on the machine, the fault may cause the work-piece fall
or tip damage, also scatter debris throughout the area, it may cause a serious risk
of injury. Therefore, the operator should stand in a safe place as viewing the
checking operation.
As open the appliance door to perform checking operation, there is a high-voltage
symbol on the electrical box. Do not touch the high-pressure area.
This area may result in serious risk of electric shock. To ensure the cover fixed on
the above of high voltage parts before performing any checking operation.
When the checking of high pressure parts is required, pay attention that contact
electrode will cause serious risk of electric shock.
Should not process work-piece before the first checking operation done. Before
producing operation, should make a trial running, such as single-cell processing,
manual feeding, machine lock function or running without tool or work-piece.
To ensure the machine can run correctly. If the trial running not be performed may
cause machine having unexpected action, may also cause the work-piece and / or
machine itself damage or injury to the user.
The parameter settings in PMC controller have been the best value, so those
parameters do not need to modify usually. When the parameters need to be modified
for some reason, make sure you fully understand the function of parameters before
modifying. If the parameter error, it may result in unpredictable actions and damage
the work-piece and machine or harm the user.
(8)
(9)
(10)
1.
Overall security
1.
Overall security
1.
Overall security
1.
Overall security
1.
Overall security
Property
of
Kent
Industrial
USA
Do
Not
Reproduce
