R AD AR
41
4.2.9
Z-axis forward control key: As the selector set in RAPID mode or JOG mode,
(1)
the Z-axis move forward and the speed rate according to the related feeding
(2)
(3) X-axis forward control key: As the selector set in RAPID mode or JOG mode,
X-axis backward control key: As the selector set in RAPID mode or JOG mode,
(4)
the X-axis move backward and the speed rate according to the related feeding
Axial control switch
speed rate.(Refer to: 4.2.2, 4.2.3)
Z-axis backward control key: As the selector set in RAPID mode or JOG mode,
the X-axis move forward and the speed rate according to the related feeding
(5)
It’s active in RAPID mode, JOG mode
speed rate.(Refer to: 4.2.2, 4.2.3)
speed rate. (Refer to: 4.2.2, 4.2.3)
speed rate.(Refer to: 4.2.2, 4.2.3)
C-axis forward movement (+ C): It is active in RAPID mode, JOG mode and
C-axis start (C ON) mode , As the key is "ON" , the C-axis is forward rotating.
The rotating speed controlled by cutting feeding or rapid feeding speed switch.
(6) C-axis reverse movement (- C): It is active in RAPID mode, JOG mode and
C-axis start (C ON) mode , As the key is "ON" , the C-axis is reverse rotating.
The rotating speed controlled by cutting feeding or rapid feeding speed switch.
(7) Limit release key: If the machine over-travel to touch the limit switch, then keep
pressing down the button, then move it back to the travel manually in the
opposite direction. Then execute the zero return for three-axis.
X
Z
X
Z
O.T
C
C
X
Z
X
Z
O.T
C
C
Figure 4.17
Filter keys: Press ON, start the paper filter operation; press again the paper filter
4.
Operating
4.
Operating
4.
Operating
4.
Operating
4.
Operating
4.
Operating
4.
Operating
4.
Operating
Property
of
Kent
Industrial
USA
Do
Not
Reproduce
