R AD AR
33
4.2.4 Spindle worktable:
It is active in RAPID mode, JOG mode.
( ) When spindle starts under AUTO & MDI mode, choose mode into RAPID,
(1)
HANDLE, JOG to adjust spindle speed.(Figure 4.5)
Before starting worktable, should make sure there are not any person and tools
on the table except work-pieces then may perform worktable rotating operation.
( ) It’s active in RAPID model, HANDLE model, JOG model and MANUAL MODEL
(2)
to manually start the table spindle select spindle CW or spindle CCW , Button is
pressed spindle Will be in accordance with (Figure 4.6) Table rotation speed of
the selected speed.
( ) MANUAL MODEL:Start table JOG, Then press the spindle CW or spindle
(3)
CCW button, then adjust the spindle speed manual selection button
(Figure 4.6), before we can make table jog.
Caution ! Turn the knob from the left-down to right-down side, the speed of
worktable increases from low to high speed. Before using the worktable
clockwise (CW) or count clockwise (CCW) turning, be sure to turn the knob
(Figure 4.6) on the left-down side and then slowly move to right-down side.
80
90
100
120
110
60
140
50
150
%
70
130
MANUAL
MODEL
Figure 4.5
Figure 4.6
Figure 4.7
Figure 4.8
Figure 4.9
SPINDLE LOAD
%
0
50
180
150
100
CW
STOP
CCW
MANUAL
MODEL
ORCM
JOG
4.
Operating
4.
Operating
4.
Operating
4.
Operating
4.
Operating
4.
Operating
4.
Operating
4.
Operating
4.
Operating
4.
Operating
4.
Operating
4.
Operating
4.
Operating
4.
Operating
4.
Operating
4.
Operating
Property
of
Kent
Industrial
USA
Do
Not
Reproduce
