R AD AR
6
1.2
1.3
Notice of automatic and manual mold
(1)
(2)
(4)
(5)
(7)
(8)
(13)
(16)
(12)
(6)
All operating process is required by regulations of manual.
Any person shall not start the machine when the protective covers or security
components are removed.
Before start the machine, the security doors should be closed.
Before cutting the first work-piece, the operator should check the program or the
displacement of tool or turret.
So the check procedure should be intermittently running and then continuous cutting.
The operator should not touch cutting chips or the work-piece as cutting.
Should not touch the rotating axis or work-piece, or attempt to stop one of the moving.
The operator should confirm the position of the turret when the tool be locked up.
Check the tool compensation settings before start operating.
Confirm the position of the zero-return point.
Confirm the speed increasing button of spindle speed and feed rate on CNC control
panel to be set to 100%.
Confirm the safety gate and tower will not interfere with each other when the
work-piece in the processing area.
Therefore the limit area of X-axis and Z-axis should be safe also.
Confirm the turning area of all tools on the turret will not interfere with each other.
The transmission power of actual cutting should be maintained less than
maximum range.
The clamping and locking methods of the work-piece should be exactly completed.
The coolant nozzle should be tune to an appropriate direction.
When manually changing the tool inside the magazine, the operator should be aware
of all safety conditions.
(10)
(11)
(3)
(9)
(14)
(15)
1.
Overall security
1.
Overall security
1.
Overall security
1.
Overall security
1.
Overall security
1.
Overall security
Property
of
Kent
Industrial
USA
Do
Not
Reproduce
