Keithley 3700 series Скачать руководство пользователя страница 196 | Manualshive

Страница: 196 / 434

Keithley 3700 series Скачать руководство пользователя страница 196

Section 9

:

Instrument Control Library (ICL)

Series 3700 System Switch/Multimeter Reference Manual

9-52

Document Number: 3700S-901-01 Rev. A / August 2007

digio.trigger[N].stimulus

Remarks

This attribute selects which event(s) will cause digital output line to assert a trigger. Set
this attribute to 0 to bypass waiting for an event.

eventid

may be one of the following (existing trigger event ID's):



digio.trigger[N].EVENT_ID: An edge (either rising, falling, or either based on the
configuration of the line) on the digital input line.



display.trigger.EVENT_ID: The trigger key on the front panel is pressed.



trigger.EVENT_ID: A *trg message on the active command interface. If GPIB is
the active command interface, a GET message will also generate this event.



trigger.blender[N].EVENT_ID: A combination of events has occurred.



trigger.timer[N].EVENT_ID: A delay expired.



tsplink.trigger[N].EVENT_ID: An edge (either rising, falling, or either based on the
configuration of the line) on the tsplink trigger line.



lan.trigger[N].EVENT_ID



scan.trigger.EVENT_SCAN_READY: Scan Ready Event.



scan.trigger.EVENT_SCAN_START: Scan Start Event



scan.trigger.EVENT_CHANNEL_READY: Channel Ready Event



scan.trigger.EVENT_MEASURE_COMP: Measure Complete Event



scan.trigger.EVENT_SEQUENCE_COMP: Sequence Complete Event



scan.trigger.EVENT_SCAN_COMP: Scan Complete Event



scan.trigger.EVENT_IDLE: Idle Event

Example

To set the trigger stimulus of digital I/O line 3 to be the channel ready event during a
scan:

digio.trigger[3].stimulus = scan.EVENT_CHANNEL_READY

To clear the trigger stimulus of digital I/O line 3:

digio.trigger[3].stimulus = 0

digio.trigger[N].wait

Function

Waits for a trigger.

Usage

triggered = digio.trigger[N].wait(timeout)

N

: Digital I/O trigger line: 1 to 14

timeout

: Set timeout in seconds.

triggered

: Returns `true' if a trigger was detected, or `false' if no triggers were

detected during the timeout period.

Remarks

This function will wait up to timeout seconds for an input trigger. If one or more trigger
events were detected since the last time digio.trigger[N].wait (this function) or

digio.trigger[N].clear

(on page 9-49) was called, this function will return immediately.

After waiting for a trigger with this function, the event detector will be automatically
reset and re-armed. This is true regardless of the number of events detected.

Also see

digio.trigger[N].clear

(on page 9-49)

«
...
194
195
196
197
198
...
»

Содержание 3700 series



















































































































































































































































































































































































































































Отзывы:

Нет отзывов