Intellipuff Service Manual
Page 15 of 51
Issue D 27/02/2014
EP59-12317
reset the PC, switch OFF the Pulsair and the calibration box and then switch
them back ON and try again until uninterrupted communication is established.
Mode Selection Form
The first form that the user interacts with is the mode select form. This will
provide the user with several options.
An option to read the current contents of a Pulsair EEPROM and check its
validity via a checksum, it also allows the user to print current calibration data.
An option to automatically read the EEPROM data and carry out a full
calibration.
An option to enter a setup form to setup serial ports if necessary and also
calibrate the calibration system if not previously calibrated.
An Option to completely Exit the calibration process.
Each of the options is further described below.
