Kathrein UFS 940sw, Руководство по эксплуатации

Страница: 99 / 132

99
After calling up the menu you will see
the following display:
The

buttons allow you to
select different sets of parameters for
the search.
Satellite
Use the

buttons to select the satellite that is transmitting the channels to be searched.
Make sure your reception system is aligned to the selected satellite.
Transponder Frequency
Use the

buttons (transponder frequency already saved) or the number keys (transponder
frequency not yet saved) to select the transponder frequency on which the channel being sought
is broadcast.
DVB Type
Use the

buttons to select whether the search should be for standard channels (DVB-S (SD))
or for HDTV channels (DVB-S2 (HDTV)).
Modulation
Use the

buttons to select the appropriate type of modulation. There is no need to input the
type of modulation when searching for standard channels. Instead a fi xed display of “Automatic”
appears. When searching for HDTV channels you must enter the correct type of modulation
(either QPSK or 8PSK).
Polarisation
Press the

buttons to select the correct polarisation (horizontal or vertical).
Symbol Rate
Use the number keys to enter the related symbol rate.
Service ID
Use the

buttons or the number keys to enter the service ID of the channel to be searched for.
Mainmenu - Search Channel